40
off. If either door is not closed, the door will
not lock when you press the locking/car
search mode button on the intelligent key.
Click the following on the multimedia display
in sequence: Vehicle Settings → Sound →
Prompt Sound, and then enable or disable
the locking prompt sound in the interface.
Remote Unlocking
Briefly press the unlocking button on the
intelligent key to unlock the all doors or
driver door, and the turn signal will flash
twice. Briefly press the tailgate unlocking
button to unlock the tailgate. If equipped
with a power tailgate, press and hold the
tailgate unlocking button and the tailgate will
open automatically.
Do not let children from entering the
luggage compartment. Make sure the
tailgate is closed when the vehicle is
unattended. If a child is trapped in the
luggage compartment, it is likely that he or
she will not be able to escape and will end
up in heat stroke or other unintentional
injuries.
• Please keep the spare intelligent key in a
safe place but not in the vehicle.
• Equipment with built-in anti-theft chip
may cause interference to the intelligent
key system and the anti-theft system of
the vehicle; These systems may work
abnormally and the vehicle possibly
cannot be started.
Setting of Remote Unlocking
Function
Click the following on the multimedia display
in sequence: Vehicle Settings → Vehicle
Control → Doors and Windows. Then,
enable or disable the function of driver door
unlocking only in the interface.
• After this function of driver door
unlocking only is enabled, briefly press
the unlocking button on the intelligent key
once will only unlock the driver door. It is
necessary to briefly press the intelligent
key unlocking button again within a
certain period of time to unlock all doors.
• After this function of driver door
unlocking only is disabled, briefly press
the unlocking button on the intelligent key
once to unlock all doors.
If the intelligent key is interfered by
other signals, the vehicle may not be
able to detect the intelligent key for starting,
unlocking and locking, etc.
• Placing the intelligent key together with
metal shielded item, for example, mobile
phones with a metal housing.
• Placing the intelligent key besides the
standby power supply or within the range
of interference when external devices
Enter and Exit
To Next Page
Loading...