117
Traction Control System
(TCS)
Traction Control System (TCS) helps the
vehicle by preventing loss of traction on the
drive wheels. When the system detects that
a drive wheel is slipping, it will brake the idle
drive wheel to prevent it from idling.
Hill-start Assist Control
(HAC)
When starting on a slope and the driver
releases the brake pedal, the Hill-start
Assist Control (HAC) can maintain the
braking force for about two seconds to
prevent the vehicle from rolling back.
The hill-start assist control function
can only be activated when the
Electronic Stability Control (ESC) system is
activated and the electric parking brake
(EPB) is fully released.
The hill-start assist control function
only maintains the brake pressure
shortly when the driver releases the brake
pedal. If the accelerator pedal is not pressed
or the electric parking brake (EPB) is not
engaged, the vehicle may roll back on the
slope after about 2 seconds. Therefore,
drive carefully when starting on the slope!
Starting and Driving
To Next Page
Loading...