19
Three-point Seat Belt
1. Pick up the latch plate, and pull seat belt
across body. Do not twist the seat belt；
The three-point seat belt may lock when
being pulled across body too fast. If this
occurs, release and retract it a little to
unlock it. And then pull the seat belt
slowly across your body.
2. Press the latch plate into the buckle until
a “click” sound is heard；
Pull the latch plate to make sure it is
locked. Make sure the position of the
release button on the buckle for the
convenience of unfastening the seat
belt when necessary.
3. The lap belt can be tightened if the
shoulder belt is pulled up.
4. To release seat belt, press red button on
the buckle. Seat belt should return to
unused state.
Avoid any foreign objects such as
food scraps, nut shells, buttons, coins,
viscous liquid from falling into the seat belt
buckle. It may cause the failure of the seat
belt reminder function and the locking or
unlocking function of the buckle.
Do not insert objects other than the
vehicle latch plate into the buckle.
Otherwise, it may cause the failure of the
buckle. This will reduce the protective effect
of the seat belt and may cause serious
personal injury or death.
In order to prevent the seat belt from
hurting the surrounding area due to
too fast retraction or getting stuck due to too
slow retraction, please return the seat belt to
the original position after unfastening the
seat belt.
The door will not clip the seat belt until
it is closed. Otherwise, the seat belts
and doors will damage.
Safe Travel
To Next Page
Loading...