98
Intelligent Headrest Audio*
Click the following on the multimedia display
in sequence: Vehicle Settings → Sound →
Sound Effect → Space Effect to enable the
intelligent headrest switching mode function
in the interface. When there are people in
the front passenger seat, this function will
automatically switch the audio setting to
driver mode; in which the sound of driver
headrest will be turned on. When the
navigation, telephone ringtone, and call
sound are made, these sounds will only be
played through the headrest, and only the
driver can hear it clearly.
The headrest of driver can be
adjusted up and down, but cannot be
removed. If the audio headrest has a failure,
please contact an PROTON e.MAS service
outlet.
Adjustment of Rear Seat
Headrest
1. Press and hold the headrest adjustment
button under the rear seat headrest.
2. Lift up or push down the headrest to the
desired height, and then release the
button.
3. Gently push or lift the headrest again
until a click is heard, to ensure that the
headrest is locked in place.
Press the adjustment button to push
in or pull out the headrest.
Knowing Vehicles