118
Hill Descent Control (HDC)
HDC can actively brake the vehicle when it
is going downhill to ensure that the driver
can drive down the steep slope safely at a
constant speed.
• HDC only plays an auxiliary role. At any
time, the driver should be responsible for
the safety of the vehicle and keep an eye
on the surrounding traffic.
• When a slope is too large, HDC may not
be able to keep the vehicle driving down
the steep slope at a constant speed.
Then, the vehicle speed can be
controlled by pressing the brake pedal.
Enabling/Disabling System
Click Vehicle Settings → Driving → Driving
Scene Assistance to enable/disable the
HDC function in the interface.
• HDC can only be activated when the
vehicle speed is less than 35 km/h, and
the system will automatically turn off
HDC when the vehicle speed is higher
than 60 km/h.
• HDC cannot be enabled or automatically
disabled when the brake temperature is
too high.
• Turn on the HDC function via the
multimedia display, and the HDC
indicator on the instrument cluster
display does not light up or turns yellow,
indicating that the HDC system cannot
be enabled.
Starting and Driving
To Next Page
Loading...