127
• In cases where the vehicle speed is high,
if the right turn signal lamp is activated
when overtaking from the right, ACC will
automatically accelerate the vehicle and
reduce the distance to the vehicle ahead.
If the vehicle enters the overtaking lane
and there is no vehicle ahead, ACC will
automatically accelerate to the set cruise
speed.
• ACC cannot detect the items loaded or
accessories mounted on the target
vehicle that protrude from its side, rear
end or roof. If the preceding vehicle has
the above-mentioned special load or
equipment, ACC must be turned off when
overtaking such vehicles.
• After the system requires the driver to
take over the vehicle, if the vehicle
continues to move, the driver must apply
the brake pedal to brake.
• Structural modification of vehicle, such
as lowering the chassis height, adding
any object (sticker, etc) to front
windshield or changing the front
windshield, may affect the ACC system.
Function Selection
Click the following on the multimedia display
screen in sequence:
Vehicle Settings → Auxiliary Driving →
Intelligent Driver Assistance, and select the
Adaptive Cruise Control (ACC) function in
this interface.
After selecting the ACC function on the
multimedia display, ACC can be turned on
or off by using the Cruise Control buttons on
the left side of steering wheel (via steering
wheel control button).
Steering Wheel Control Button
Cruise control buttons for ACC system are
on the left side of the steering wheel.
1. OK button
Driving Assist
To Next Page
Loading...