104
mode will turn to OFF position, and most
functions will turn off or delay.
Power-on and Power-off Methods
in the vehicle
Click the following on the multimedia display
in sequence: Vehicle Settings → Vehicle
Control → More and click the power off
button in this interface to set the power
supply mode status to OFF position.
Starting Operations
Depress the brake pedal and move the gear
shift lever to Drive (D) position to start the
vehicle. If a valid intelligent key is not
detected in thisa vehicle or is subject to
some disturbance, the meter instrument
display will prompt that the key is not in the
vehicle. If the battery inside the intelligent
key is weak and need to be replaced, refer
to "Replacing key battery" section.
As long as all starting conditions are
met, move the gear shift lever to
Driving (D) position. After powering on the
vehicle, READY indicator in the meter
instrument will turn on to indicate that this
vehicle is now ready to be driven..
When electronic devices such as
mobile phones and laptops are placed
together with the intelligent keys, the
keyless start function may fail. Keep away
the intelligent key at a certain distance from
the electronic devices. Placethe intelligent
key at the area engraved with key logo in
the storage box at the front center armrest.
Emergency Start Function
When you move the gear shift lever to
Reverse (R) or Drive (D) position but the
vehicle did not start to move forward, the
meter instrument may prompt a text. This
may happen in case the vehicle is too close
to a strong electromagnetic interference
area, the battery power of the intelligent key
is low, or the non-inductive starting function
fails.
Start the vehicle as per the following steps:
Starting and Driving
To Next Page
Loading...