77
Settings → Vehicle Control → Exterior
Lighting and select the height of the
headlamp beam in the interface.
Daytime Running Light
After the vehicle is started, when the low
beam is off and in daytime running light
mode, the daytime running light will turn on.
When the low beam is turned on, the
daytime running light will turn off
automatically.
For daytime running light that is built
in the headlamp, when the turn signal
lamp is activated, the daytime running lamp
on the corresponding side will temporarily
turn off.
Follow Me Home
Turning on the Follow Me Home
Function
Click the following on the multimedia
display: Vehicle Settings → Lights → Follow
Me Home in sequence, and then select your
preferable timing under the Follow Me
Home setting interface to turn on the Follow
Me Home function.
During nighttime, when the vehicle anti-theft
is in disabled mode and the Follow Me
Home function is enabled in the multimedia
display, the Follow Me Home function will
automatically activate after the vehicle is
powered off.
Turning off the Follow Me Home
Function
Click the following on the multimedia display
in sequence: Vehicle Settings → Lights →
Follow Me Home, and then select Off in the
Follow Me Home setting interface to turn off
the Follow Me Home function.
The Follow Me Home function will turn off
temporarily if any of the following conditions
is met:
• The vehicle power is not in OFF mod.
• Reaching its time out.
• High beam is turned on.
Timing of Follow Me Home Function
Click the following on the multimedia display
in sequence: Vehicle Settings → Lights →
Follow Me Home, and select the activation
timer under the Follow Me Home setting
interface according to your needs. The
Follow Me Home function will perform
according to the preselected timer when it is
activated; Before time out, if any door
(including the tailgate) is opened and all
doors are closed, the timer will be reset to
the preselected timing time.
Lighting
To Next Page
Loading...