83
Overview of Meter
Instrument
1. Clock
Click the following on the multimedia display
in sequence: Vehicle Settings → Display →
Common Unit → Time, and then set the
time format in the interface.
2. Speedometer
The speedometer shows the current vehicle
speed per hour.
3. Information menu
Displays the current playing media audio
source, average power consumption,
current mileage and vehicle condition
information.
Average power consumption: refers to the
average power consumption used to drive
the vehicle for a certain mileage. Click the
following on the multimedia display in
sequence: Energy Management → Mileage
Statistics → Energy Consumption Curve.
After the last 50 km or last 100 km switch is
switched, the average power consumption
of the instrument will switch and display
accordingly.
Power consumption curve: It is drawn based
on the power consumption value of driving
the vehicle for the last 10 km.
4. Outside temperature display area
The outside temperature range is between
-45 °C to 85 °C.
5. Drive modes
Displays the current selected driving mode
(ECO, COMFORT, SPORT) by the driver.
6. Gear display
Displays the current selected gear (R, N, D,
P) by the driver.
7. Power meter
Displays the current power output and
recovered power of the drive motor.
If the shown power value is positive, this
indicates that the drive motor is consuming
electrical output power.
If the shown power value is negative, this
indicates that the drive motor is recovering
energy to charge the power battery.
Meter Instrument
To Next Page
Loading...