Proton e.MAS 7 - Setting Interface

162
• If the uphill hold control function has
been turned on in the panoramic image
settings, the panoramic image will be
automatically turned on after the vehicle
moves uphill at a low speed (less than 30
km/h) for a certain period of time.
Only when the vehicle speed is less
than 30 km/h, will it enter the
panoramic image interface in the way
above.
Exit the panoramic image
interface
• Touch the " return" button of
panoramic image interface on multimedia
display.
• Shift the gear from R, N and D to P. If
there is no operation within 5 seconds,
the panoramic image exits.
• Turn on the panoramic image by shifting
into reverse gear (R). When it is in non-R
gear, the panoramic image exits when
the vehicle speed exceeds 15 km/h.
• Through voice commands, for example,
enter keywords such as "Hello PROTON,
close panoramic image".
• If the panoramic image is turned on via
toggling the turn level, and the view of
panoramic image is not switched by
other operations (excluding the toggle of
left/right turn lever), when the turn lever
is aligned, the panoramic image
automatically exits.
• If the panoramic image is turned on via
the front obstacle, if the speed exceeds
15 km/h, the panoramic image will
automatically exit (Have Front parking
radar).
• Enter the panoramic image through other
operations (not activated by shifting into
Reverse (R) and not triggered by front
obstacles to activate panoramic image).
Exiting the panoramic image when the
gear is in a non-reverse (R) and the
vehicle speed exceeds 30 km/h.
• If the panoramic image is triggered by
the uphill hold control function, the
vehicle will automatically exit the
panoramic image after driving on the flat
road for a certain period of time.
Setting Interface
1. Settings
Transparent car models, steering
linkage, uphill hold control and 3D
surround effects can be set.
2. Half screen/full screen switching
Either half screen or full screen effect
can be switched.
3. 2D/3D view effect
Either the 2D view effect or the 3D view
effect can be switched.
4. Back
Exit the Panoramic Image Interface
5. Radar alarm sound
Parking Assist