161
360 Camera
Camera images on the multimedia display
allow the driver in vehicle to monitor the
front/rear, left/right video images outside the
vehicle in real time, and assists the driver in
parking.
• When using the 360 Camera, pay
attention to the surrounding conditions of
the vehicle. The system can only be used
as an auxiliary means for the vehicle. Do
not rely only on the 360 Camera.
• Panoramic camera is vulnerable to
environmental factors, such as fog, rain
and snow, night and other low visibility
environments. In such environments,
panoramic camera system should be
used carefully to ensure the safety of the
surrounding environment before use.
• The 360 Camera has a blind area and
may not be able to detect all obstacles
around the vehicle.
This vehicle adopts wide-angle fish
eye cameras, and the imaging model
is bowl-shaped, resulting in the stretching
deformation of 3D images at the splices,
and overlapping of objects at the far end of
the edge.
Panoramic camera
The panoramic video cameras are located
around the vehicle body.
Enter the panoramic image
interface
• If the steering linkage function has been
enabled in the panoramic image setting
interface, when the gear is in the non-R
position, toggle the turn lever.
• When the Button Customisation function
in the multimedia display has been set to
panoramic image, press the Button
Customisation on the steering wheel.
• Click the panoramic image APP icon on
the multimedia display.
• Through voice commands, for example,
enter keywords such as "Hello PROTON,
open panoramic image".
• Shift the gear to R position to enter the
360 Camera automatically.
• When the gear is in Drive (D)/Neutral (N),
the vehicle speed is less than 15 km/h,
and the obstacle ahead is less than 70
cm away from the vehicle, it
automatically enters the panoramic
image(Have Front parking radar).
Parking Assist
To Next Page
Loading...