58
Seat Memory Function of
Driver Seat*
For some models, there is a seat memory
function equipped for the driver seat.
1. Click the following on the multimedia
display: Vehicle Settings → Shortcut →
Seat Adjustment in sequence and then
enter the seat adjustment interface;
2. Adjust the front and rear position of the
driver seat, the angle of the seatback
and the height of the seat cushion to the
appropriate position of the driver seat;
3. Click the Save button to refresh the seat
memory; Click the restore button to
restore the original seat memory;
4. Click Save to record up to three vehicle
preferences;
5. Click the Account Center avatar in the
status bar of the multimedia display to
switch between the recorded vehicle
preferences.
• When the driver seat is manually
adjusted through the physical electric
adjustment buttons of the driver seat, the
multimedia display will automatically pop
up the seat memory interface.
• When the seat memory is not saved or
restored, the current adjusted seat
position is retained but not memorized
• When the vehicle power mode status is
in ON position, the vehicle speed should
to be less than 5 km/h to start the seat
memory function.
About the Vehicle
To Next Page
Loading...