Proton e.MAS 7 - Wheel Alignment Specification; Recommended Fluid and Capacity

237
Wheel Alignment Specification
Item
Parameters (no load)
Camber of front wheel
-23′±39′ (left-and-right difference ≤39′)
Camber of rear wheel
-25′±43.8′ (left-and-right difference ≤43.8′)
Kingpin inclination
13°5′±30′ (left-and-right difference ≤30′)
Caster
5°48′±30′ (left-and-right difference ≤30′)
Front wheel toe-in (both sides) 12′±6′ (left-and-right difference ≤6′)
Rear wheel toe-in (both sides) 12′±6′ (left-and-right difference ≤6′)
Recommended Fluid and Capacity
Item
Specification Capacity
Brake fluid DOT4 0.75 L
Drive motor and power battery
coolant
Ethylene glycol-type coolant
11.5 L
Technical Data