81
the function of Door Control Function in the
interface.
After turning on the door control function of
Interior Lamp, the interior reading light will
automatically turn on or off according to the
door status.
When using the door control function
of interior reading light to turn on the
left and right interior reading lights, the
corresponding reading light can be turned
off by pressing the left or right interior
reading light switch.
Ambient Light*
Ambient light are installed on the instrument
panel, and on the trim panels of driver door
and front passenger door.
Setting of Ambient Light
Click the following on the multimedia display
in sequence: Vehicle Settings → Lights →
Ambient Light, and then select your
preferable ambient light in the interface.
Exterior Lighting
Lighting when Approaching
(Close to Illumination)
Click the following on the multimedia display
in sequence: Vehicle Settings → Lights →
Scene Light Effect to enable or disable
Lighting when Approaching (Close to
Illumination) function in the interface.
When the function is enabled, if you
approach the vehicle with a valid intelligent
key, the exterior lights will illuminate.
Lighting
To Next Page
Loading...