124
Front Camera
1. Front camera
The Intelligent Driving System use a front
camera to identify lane boundaries and
detect targets.
Keep the front camera clean, and the
front camera's visual field of view shall
not be blocked by pollutants (such as rain,
snow, fog, water vapor, ice and frost, leaves,
bird droppings, etc.) or strong light
interference. Otherwise, it will affect the
performance of the Intelligent Driving
System. The front camera has blind spot
and distance recognition limitation, and
cannot effectively identify objects that are
beyond or at the limit of the front camera's
field of view.
• Under bad weather conditions, such as
rain, snow, fog and dust, the recognition
capability of front camera will be affected,
which may degrade the system
performance or exit the function. The
driver should always monitor the vehicle
status and take over the vehicle.
• If a system failure occurs in the front
camera, the meter instrument display will
prompt in text. Go to an authorised
PROTON e.MAS service outlet for
maintenance.
• In order to protect the electronic
components, the system function will be
temporarily unavailable when the front
camera is at extremely high temperature.
The meter instrument display will prompt
in text. When the temperature drops
sufficiently, the front camera unit will
automatically restart and the system
function will return to normal.
• If the front camera is blocked, enters a
dark environment, the light environment
suddenly changes, or is interfered by
strong light, it may cause the system
performance to degrade or exiting from
the function. The driver should always
monitor the vehicle status and take over
the vehicle.
• Do not modify the front camera. When
the front camera is subject to strong
vibration and slight impact, the
calibration will be affected and may need
to be re-calibrated. Deformation,
damage, replacement and coating of the
front windshield may also cause
inaccurate recognition.
Blindness of front camera is a normal
reaction under certain conditions.
Without blocking the view of front camera,
the driver may avoid dark surrounding and
direct sunlight, and then the system will
recover itself. If it cannot be recovered, go to
an authorised PROTON e.MAS service
outlet for maintenance.
When the vehicle power mode is
turned on, the Intelligent Driving
System needs to be initialized, and it cannot
Driving Assist
To Next Page
Loading...