153
triggered, until the speed limit value is
updated.
The speed limit alarm function only
serves as a speed limit reminder. The
driver shall actively control the vehicle
speed.
Speed Limit Deviation Setting
On the multimedia display screen, click:
Vehicle Settings → Assisted Driving →
Safety Settings → Intelligent Reminder →
Speed Limit Information Recognition in
sequence, then select the required speed
limit deviation value in the speed limit
deviation setting interface. An alarm is given
when the vehicle speed exceeds the speed
limit plus the deviation setting.
Rear Side Radar Assist
System (RSRS)
The system detects obstacles from rear side
of the vehicle based on the rear side
medium-range radar on both sides of rear
bumper. These radars are used for Lane
Change Safety Warning (LCSW) (including
blind spot monitoring function), Rear
Collision Warning (RCW), Door Opening
Warning (DOW) and Rear Cross Traffic Alert
(RCTA).
When the vehicle is powered on, the
Rear Side Radar Assist System will
start self-check, and the system function is
not available at this stage.
On the multimedia display, click in
sequence: Vehicle Settings → Assisted
Driving →
Safety Settings → Pre-collision
Assist and enable or disable the functions
as demand in this interface. The state of all
function switches remains as the previous
setting.
The system will prompt the driver of driving
safety via the on/flashing of blind spot
monitoring indicator on the exterior rearview
mirror (door mirror), meter instrument
prompt, sound alarm, flashing of hazard
warning lamp, etc.
Driving Assist
To Next Page
Loading...