154
When the vehicle is powered on, the blind
spot monitoring status indicator on the
meter instrument display lights up in green,
and the system works normally. There is a
malfunction when the blind spot monitoring
status indicator lights up in red.
• Please keep the both sides of rear
bumper surface clean;
• This system is only for driver assist, and
it cannot replace the driver’s safe
driving.
• Do not dismantle or exchange the rear
side medium-range radar.
Lane Change Safety Warning
(LCSW)
The Lane Change Safety Warning function
covers the blind spot area and the rear area
with fast approaching vehicles, to assist and
alert the driver against blind spots and rear
vehicles when driving, especially when
turning or changing lanes. The lane change
safety warning function works within the
speed range of 15 ~ 150 km/h.
1. Blind spot area
2. Area with fast approaching vehicles
When the alarm condition is met, the blind
spot monitoring indicator light on the exterior
rearview mirror (door mirror) lights up or
flashes. If the indicator and sound warning
function are turned on in advance in the
multimedia display, the system will also give
a sound warning.
In some cases, it’s difficult for the lane
change warning function to assist the driver.
Possible situations include:
• Bad weather such as rain or snow.
• For smaller targets (pedestrians,
bicycles, etc).
• For stationary targets (vehicles,
pedestrians, etc.).
Driving Assist
To Next Page
Loading...