EasyManua.ls Logo

Proton e.MAS 7 - Page 152

Default Icon
246 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
148
Early: indicates a far alarm distance and the
alarm time is relatively early.
If the driver thinks the alarm is too frequent,
a lower sensitivity can be selected to reduce
the total alarms.
Function composition
When a danger is judged by the system, the
system will assist the driver in the following
ways:
Safe distance alarm
The safe distance alarm works in a non-
emergency situation. When the vehicle
speed reaches 65 km/h or above, it
reminds the driver that the following
distance is too small, and the driver
should adjust the driving behavior and
keep a proper distance.
Forward Collision Warning (FCW)
When the vehicle speed reaches 10 km/h
or above, the system considers that there
is potential collision risk, and it will
prompt the driver of potential collision
risk through alarm sound, alarm picture
on meter instrument interface and short
brake, etc.
Emergency Brake Assist (EBA)
When the vehicle speed reaches 4 km/h
or above, if a danger occurs, but the
drivers current braking force is too
small, the system will assist the driver to
increase braking force to avoid or
mitigate the collision.
Automatic Emergency Braking (AEB)
When a danger occurs but the driver fails
to perform effective braking, the system
will intervene timely by automatic
emergency braking to avoid or mitigate
collision. Automatic emergency braking
reduces speeds by up to 60 km/h.
Function activation
CMSF working speed
The target ahead is a vehicle: When the
vehicle speed is 4 km/h~150 km/h, the
CMSF system will work. Beyond this range,
the CMSF system will not work.
The target ahead is pedestrian and two-
wheeled vehicle: When the vehicle speed is
4 km/h~90 km/h, the CMSF system will
work. Beyond this range, the CMSF system
will not work.
When the front collision warning function
detects a collision risk, it will remind the
driver to react in time through sound,
pictures on meter instrument and short
braking to reduce the collision risk. If the
driver applies insufficient braking or no
braking, the emergency brake assist or
automatic emergency brake will actively
intervene to mitigate or avoid collision, and
there will be pictures and text prompts on
the meter instrument, as well as sound
alarm.
Collision mitigation support front
Driving Assist

Table of Contents