156
(exterior rearview mirror) lights up or
flashes and gives a sound warning to
remind the driver of the risk to open the
door.
The door opening warning function mainly
detects the following targets:
• Four-wheeled vehicle
• Two-wheeled vehicle
• Running pedestrians
Click the following on the multimedia display
in sequence: Vehicle Settings → Assisted
Driving → Safety Settings → Pre-collision
Assist, and then select to enable or disable
the door opening warning in this interface. In
some cases, it’s difficult for the door opening
warning function to assist the driver.
Possible situations include:
• Bad weather such as rain or snow.
• The relative speed between the rear
vehicle and the own vehicle is too high or
too low.
• The rear vehicle approaches after
changing lanes from other lanes.
• In sharp turns, ramps and other scenes.
• For smaller targets (pedestrians,
bicycles, etc).
After the vehicle is powered off for 3
minutes or the vehicle is locked and
powered off, the door opening warning
function stops working.
Rear Cross Traffic Alert (RCTA)
The rear cross traffic alert uses the rear side
medium-range radar to monitor approaching
targets. When a collision risk is detected
between the vehicle and rear vehicles,
motorcycles, bicycles, pedestrians, etc., the
blind spot monitoring indicator on the
corresponding exterior rearview mirror
remains on or flashes, and it reminds the
driver to react in time through sound and
vehicle-machine interface to reduce the
collision risk.
Driving Assist
To Next Page
Loading...