178
2. Use a flat screwdriver to insert the back
of the battery cover plate and pry open
the battery cover plate;
3. After replacing the battery with a new
one, buckle the battery cover plate,
noting that the positive pole of the
battery faces the back cover. Smart key
battery model: 3V, CR2032;
4. Engage the two halves of key cover in
place.
• Replacing the battery yourself may
damage the key. If necessary, it is
recommended to contact the PROTON
Service outlet for replacement.
• If the replaced key still cannot be used,
contact the PROTON service outlet for
maintenance.
• To prevent children from swallowing the
replaced battery, keep the battery out of
the reach of children.
Dispose of waste batteries according
to local regulations to avoid damaging
the environment.
Maintenance and Repair
To Next Page
Loading...