184
3. While pressing the unlocking clip of the
wiper blade, pull out the wiper blade
along the arrow direction to separate it
from its wiper arm;
4. Remove the wiper blades;
When front windshield wiper blade is
not mounted, do not let the wiper arm
gets in contact with the windshield glass;
otherwise, the windshield will damage.
Damage caused thereby is not covered by
warranty.
5. Install new wiper blades in reversed
sequence of step 2 to 4.
6. Exit the wiper service position function
by turning off the front wiper service
position switch in the multimedia
interface.
Replacing the Rear Windshield
Wiper Blade
1. Raise the wiper arm of the rear
windshield wiper away from the rear
windshield glass.
2. While pressing the unlocking clip of the
wiper blade, pull out the wiper blade
along the arrow direction to separate it
from the wiper arm;
3. Install new rear windshield wiper blade
in reversed sequence of step 1 to 2.
Maintenance and Repair
To Next Page
Loading...