193
• For solid dry stains: Remove as much as
possible with hand, and then remove the
remaining with a vacuum cleaner.
Cleaning steps:
1. Soak the clean lint-free white cloth in
water or soda water.
2. Wring the cloth to remove residual
water.
3. Use the wet cloth to gently scrub from
edges to the middle until no more stain
marks are left on the fabric or carpet.
4. If the stains cannot be wiped off
thoroughly, repeat the above cleaning
operations with mild soap water.
If stubborn stains still cannot be removed
thoroughly, consider to use synthetic fabric
cleaner or detergent; test the cleaning
solvent for color fastness on an invisible
position in the vehicle. If the cleaning effect
is good, proceed to clean the entire surface.
After cleaning, use a tissue to absorb
residual water on fabrics or carpets.
Leather Cleaning
Use a wet soft cleaning cloth to remove
dust. To clean more thoroughly, use soft
cleaning cloth dipped in neutral soap water.
Please let the leather dry in air, do not dry it
by baking, and do not clean leather with
steam.
Do not use detergents or polishes on
leather. Otherwise the appearance and
hand feel of the vehicle interior trims may be
permanently changed. Do not use silicon-
based, wax-based or organic solvent-
containing products to clean the vehicle
interior trims, which may cause uneven
gloss of leather and affect the appearance
of the interior trims. Be sure not to use shoe
polish on leather.
Instrument Panel and Other
Plastic Surfaces
Do not use detergents or polishers on
plastic surfaces. Otherwise, it may
permanently affect both appearance and
surface texture of the interior trims . Some
car care products may enhance the
glossiness of instrument panel and thus
cause reflection on the windshield glass,
which may severely affect your vision
through the windshield when driving.
Do not use any cleaning solvent
containing alcohol or strong oxide
chemicals to wipe the interior trims.
Maintenance and Repair
To Next Page
Loading...