195
3. Disconnect the low-voltage repair switch
in the front compartment;
4. Open the driver door and remove the
cover under the front centre console of
instrument panel as shown in above
picture. Disconnect the negative cable
from the negative terminal of the low-
voltage battery.
5. Clamp the fuse head with fuse clip to
remove the fuse, and check whether the
metal wire is blown;
A- Fuse is intact
B - Fuse is blown
Do not try to repair any blown fuse. Do
not substitute any blown fuse with a
fuse of different color or amperage.
Otherwise, the electric system will get
damaged or cause fire due to overload of
wires.
6. Replace with a new fuse of the same
type and rating. If the fuse blows
immediately after replacement, please
Maintenance and Repair
To Next Page
Loading...