231
• Before turning on the Trailer Mode, make
sure the vehicle is in a stable condition to
avoid accidents caused by slipping. It is
necessary to shift the gear to Park (P)
position and press the brake pedal to
start the Trailer Mode. After the towing
has completed, exit the Trailer Mode in
time and reset the vehicle by locking or
restarting it to ensure that the vehicle is
in normal condition.
After an accident, if the vehicle cannot start
normally, evacuate the vehicle from the
scene as shown in the next figure.
Vehicle towing precautions are as follows:
• Towing method of flat-bed towing truck
(with all wheels off the ground) should be
used. Avoid using the towing methods as
shown in figure ②③④⑤.
• Put the vehicle power mode in OFF
position before towing, turn on the
hazard warning lamp, close all doors and
lock the doors using the emergency
mechanical key. During towing, do not let
anybody stay in the vehicle.
• If it is not possible to tow the vehicle
normally with a flat-bed towing truck, the
vehicle can be towed urgently to a safe
area by rigid connection and wait for
rescue.
• Avoid long-distance towing when
adopting rigid towing and the towing
speed should be no more than 5 km/h.
Only tow the vehicle from the scene
when it is confirmed that there is no
safety risk. If the vehicle battery pack is
deformed, leaking, smoking, etc., safety
risk should be prevented first.
Emergency Rescue
To Next Page
Loading...