72
• After the next operation stops.
• The sunroof/sunshade switch is operated
in the opposite direction.
• Operation through remote control.
Protection Safety Anti-pinch
Lifting and Anti-pinching
• When the sunroof glass is tilted, if it
encounters obstacles, the glass will be
returned to the closed position.
• When the sunroof glass is closed in the
lifting position, if an obstacle is
encountered, the sunroof glass will return
to the fully lifting position.
Sunroof Glass and Sunroof Shade
Anti-pinch
• If the sunroof glass or sunroof shade
encounters an obstacle when it is
opened in the sliding mode, it will be
returned by 50mm or fully closed.
• If the sunroof glass or sunroof shade
encounters an obstacle when it is
opened in the sliding mode, it will be
returned by 200mm or returned to the
fully open position.
When the sunroof is running, if the
anti-pinch cannot be closed or
opened, press and hold the close or open
button within 10 seconds after the anti-pinch
return stops. At this time, the anti-pinch
function and automatic operation function
will be suspended, and the sunroof or
sunshade will be manually closed or
opened, and the action will be stopped after
releasing hands. After 10 seconds, the anti-
pinch function and automatic operation
function will be restored.
It is necessary to check whether there
are foreign objects in the sunroof
guide rail first to avoid damage to the
sunroof caused by forced opening or
closing!
Self-learning of Sunroof
If the low-voltage battery of vehicle is
reconnected after power failure or does not
work properly, it is necessary to perform
self-learning for the sunroof that has anti-
pinch function to enable the automatic
operation and anti-pinch function.
The self-learning steps are as follows:
1. Move the sunroof and sunshade to
closing point;
2. Click the sunroof close button and hold
it. The sunroof will move in the closed
direction after 10s, and after the sunroof
moves to the mechanical hard stop
center, it will retract a certain distance to
stop at the fully closed point. The
sunshade moves in the closing
direction, and the sunshade moves to
the mechanical hard stop center and
then retracts a certain distance to stop
at the fully closed point. Keep the
sunroof/sunshade switch unmoved. The
sunshade stops when it reaches the
fully open position, the sunroof lifts and
closes, and stops when it reaches the
fully open position;
3. The sunroof stops when it reaches the
fully closed position, the sunshade
stops when it reaches the fully closed
position, and the initialization learning
movement is completed after releasing
the switch.
About the Vehicle
To Next Page
Loading...