EasyManua.ls Logo

Proton e.MAS 7 - Page 78

Default Icon
246 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
Operation of Wiper Combination
Switch
Inching Wiping of Front Wipers
Briefly press the button at the endmost of
the light/wiper control lever once, and the
front wiper will perform inching wiping
operation.
Turning off the Front Wipers
When you turn the front wiper control switch
until the
mark points to position, the
wiper will turn off.
Automatic Wiping of Front Wipers
Turn the front wiper control switch in A
direction until the
mark points to or
position; the front wiper will perform the
automatic wiping operation. The wiping
speed is automatically adjusted by the wiper
control system as per rainfall.
When the
mark points to position, the
wiper system becomes less sensitive in
sensing rain.
When the
mark points to position, it
indicates that the wiper system becomes
more sensitive in sensing rain.
Low-speed Wiping of Front Wipers
Rotate the front wiper control switch in A
direction until the
mark points to
position, the front wiper will perform the low
speed wiping operation.
High-speed Wiping of Front Wipers
Rotate the front wiper control switch in A
direction until the
mark points to
position, the front wiper will perform the high
speed wiping operation.
Operation of Front Washer
Fully press the button at the endmost of
the light/wiper control lever to the 2nd notch
position and hold; the front wiper will wipe
continuously while the front washer will keep
spraying water. After you release the
button, the front washer will stop spraying
water and the front wiper will continue to
move for several cycles; then stop.
Wiping and Washing of Rear Wiper
Push the rear wiper control switch in C
direction until the
mark points to
position; the rear wiper will wipe
continuously.
Push the rear wiper control switch in the B
direction until the
mark points to
position; the rear wiper will stop wiping.
Operation of Rear Washer
Push and hold the rear wiper control switch
in B or C direction to
position; the rear
wiper will wipe while the rear washer sprays
water. After you release the rear wiper
control switch, the rear washer will stop
spraying water and the rear wiper will return
to its park position to stop; or wipe
continuously after several cycles and then
return to its park position to stop.
About the Vehicle

Table of Contents