PULSAR MEASUREMENT
137
Totaliser Audits
When Ultra Wizard = 3 Flow
P460 to P479 Total Audits
Parameters P460-P479show the date and flow total for the last ten days,
the first on the list are the most recent and last ones are the oldest. When all
ten total audits are full the oldest is pushed out and all totals increment
through to allow the new days total to be registered in the first day’s total
audit parameter allocation.
P480 Clear Logs
This parameter enables all the Total Audits (P460 – P479) to be cleared to
factory default values.
Important Notice
To ensure the accuracy of Flow during a 24-hour period, ensure that the
Time P932 is set correctly. And if required, enable Daylight Saving for
the appropriate time difference P970 – P979.
To Next Page
Loading...
