Pulsar Ultra 4 - Totaliser

ULTRA 4 INSTRUCTION MANUAL
158
Auxiliary Line Options
OPTION
DESCRIPTION
When Ultra Wizard: 1 = Level/Volume, 2 = Pump, 3 = Flow
1 = None
No information displayed on Auxiliary Line
2 = Status
Displays the current Status of the transducer
3 = Level
Instantaneous Level reading will be displayed
4 = Distance
Instantaneous Distance reading will be displayed
5 = Space
Instantaneous Space reading will be displayed
6 = mA Out
Instantaneous mA Out reading will be displayed
7 = Strength
Instantaneous Echo Strength figure will be displayed
8 = Confidence
Instantaneous Confidence figure will be displayed
9 = Temperature
Instantaneous Temperature reading will be displayed
When Ultra Wizard: 1 =Level/Volume
10 = Volume
Instantaneous Volume reading will be displayed
When Ultra Wizard: 3 = Flow
10 = Flow
Instantaneous Flow reading will be displayed
11 = Average Flow
Current Average Flow reading will be displayed
12 = Head
Instantaneous Head reading will be displayed
13 = Tot D
Instantaneous Daily Totaliser will be displayed
14 = Tot R
Instantaneous Resettable Totaliser will be displayed
15 = Tot S
Instantaneous System Totaliser will be displayed
Totaliser
P820 Totaliser
Displays the current value of the non-resettable totaliser. During run mode,
this totaliser can be viewed via the keys. Unlike the resettable
totaliser this totaliser cannot be reset whilst in run mode, it can however be
reset whilst in program mode by accessing P820 Totaliser and entering a
value of zero.
P821 Totaliser (R)
Displays the current value of the resettable totaliser. This totaliser can be
allocated to appear, during run mode, on the auxiliary display line (P842).
The resettable totaliser can be reset whilst in run mode by pressing the
hot key, whilst the totlaisers are displayed.