PULSAR MEASUREMENT
157
Auxiliary
The following parameters P842, P843, P844, P845, P846 determine which
information is to be displayed on the auxiliary line(s) of the display in run
mode. Options available depend on system type chosen. A full list of
options for each system type is shown in the Auxiliary Line Options table
further in this chapter.
P842 Aux Line 1
Displays information in run mode on Auxiliary line 1.
P843 Aux Line 2
Displays information in run mode on Auxiliary line 2.
P844 Aux Line 3
Displays information in run mode on Auxiliary line 3.
P845 Aux Line 4
Displays information in run mode on Auxiliary line 4.
P846 Aux Line 5
Displays information in run mode on Auxiliary line 5.
To Next Page
Loading...
