Pulsar Ultra 4 User Manual

ULTRA 4 INSTRUCTION MANUAL
54
Saving Parameters…. Please wait
If you have selected a Volume Application, you will now be prompted
to enter details required for the calculation of your volume application.
PARAMETER
DEFAULT
DESCRIPTION
P600 Vessel Shape
0 = Cylinder Flat
Base
Shape of vessel being monitored. Select
from the options below:
0 = Cyl. Flat Base (default)
1 = Rect. Flat Base
2 = Cone Base
3 = Pyram. Base
4 = Parab. Base
5 = Half Sphere
6 = Cyl. Sloped
7 = Rect. Sloped
8 = Cyl. Flat
9 = Cyl. Parabolic
10 = Sphere
11 = Uni. Linear
P601–P603
Vessel Dimensions
Dependent on
vessel shape
selected
Enter vessel dimensions as required.
P605 Volume units
3 = Cubic
metres
Selects volume units required from the
list below:
1 = Tons
2 = Tonnes
3 = Cubic metres (default)
4 = Litres
5 = UK Gallons
6 = US Gallons
7 = Cubic Feet
8 = Barrels
9 = Lbs (pounds)
P607 Max Volume
Read Only
Displays the calculated Volume in P605
units.

Pulsar Ultra 4 Specifications

General

Brand	Pulsar
Model	Ultra 4
Category	Measuring Instruments
Language	English