3. Place all the items at the Feeder Entrance
4. The system automatically assesses the weight and size of each item and applies
postage as each piece goes along the mail path at high speed.
5. Run the piece through the mailing system to be stamped with the indicia.
How to Use Dynamic Weighing Batch Mode
Dynamic Weighing Batch Mode
In this mode, you place a stack of identical items at the Feeder Entrance. The system
assesses the weight and size of the first item and applies the same postage to all items
at very high speed.
To use Dynamic Weighing Batch Mode:
1. Tap the Weighing type zone on the home screen.
The Weighing type screen is displayed.
98
| Page 98 | Apr-15-2022 12:02 |
3
Processing Mail
To Next Page