How to Set the Default Printing Offset
The printing offset is the distance between the right edge of the envelope and the
imprint.
You can increase the distance by about 5mm or 10mm.
To change the default printing offset:
1. As supervisor (see How to Log in as Supervisor on page 269):
From the main menu, select the path: Default user settings System settings
Print Position
2. Set the default print position from the list.
3. Press [OK] to validate.
10
Configuring your Mailing System
305
| Page 305 | Apr-15-2022 12:02 |
To Next Page
Loading...
