quadient iX-7PRO Series - Connection Settings

8. You can modify any preference by using the Edit/Del function (see How to
Edit/Modify an Imprint Memory on page 308).
How to Edit / Modify an Imprint Memory
To edit or modify an imprint memory:
1. As supervisor (see How to Log in as Supervisor on page 269):
From the main menu, select the path: Predefined imprint management
2. Select an imprint memory from the list displayed on the screen.
3. Press [OK] to validate.
4. Select the menu path Edit.
The Imprint memory modification screen is displayed.
5. Use the arrows to select the preferences, then press [OK] to modify the parameters.
6.
Press to exit.
308
| Page 308 | Apr-15-2022 12:02 |
10
Configuring your Mailing System