2. Check or change the type of stamp, if you are not in [No printing] mode.
Press to access the Imprint screen:
To change the type of stamp, select Stamp type and then select [No printing] in
the Type of stamp screen. For more details, see How to Change the Current 'Type
of Stamp' on page 37.
3.
Press to return to the home screen.
If you want to seal envelopes without printing you must turn
the sealer lever on: see Using the Sealing Function on page 109.
On the [No Printing] home screen:
1.
Press . System motors start running.
2. Insert the mail piece(s) into the mail path against the rear-guide wall.
3. The Mailing System does not apply postage and the envelope is ejected.
70
| Page 70 | Apr-15-2022 12:02 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
