2. Select 'Account with access control'.
3. Press [OK] to confirm.
The Mailing System then confirms that the 'Account Mode' has been changed.
To return to the home screen, you have to press to put the
machine into sleep mode. Then continue to press to turn on
the machine.
How to Display and Change the 'Account Mode'
Follow the steps below to display the 'Account Mode' management menu to gain
access to the 'Account mode' selection screen and the 'Account mode' parameters.
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, and select the path: Account Management Account
Mode Selection
The Account Mode Selection screen is displayed.
162
| Page 162 | Jan-15-2024 09:55 |
6
Accounts and Access Control
To Next Page
Loading...
