Power Connection2.3
Before powering up your mailing system, please ensure that the system meets your
local AC voltage requirements (230V - 50Hz).
THIS EQUIPMENT MUST BE GROUNDED
•
Only connect the power plug to an outlet provided with a
protective ground contact.
•
To reduce the risk of fire, use only the power cord supplied
with the mailing system.
•
Do not use ground adaptors.
•
Do not use this product on a wet floor or near water.
•
In case of liquid spillage, disconnect the power cord from
the outlet and proceed to cleaning.
In addition to checking the power requirements, we also recommend that you:
•
Use an outlet that is easily accessible.
•
Do not route the power cord between furniture or over sharp edges.
•
Avoid using outlets controlled by wall switches or shared by other equipment.
•
Make sure the mailing system is close enough to the electric outlet so that it
leaves plenty of slack on the power supply cord.
10
| Page 10 | Jan-15-2024 09:55 |
2
Safety Information
To Next Page
Loading...
Need help?
General
