How to Edit/Modify a Job Memory
To edit or modify a Job Memory:
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Job Memory Management
2. Select the Job Memory that you want to edit/modify.
3. Select Edit/Del.
4. Select Edit.
The Job memory modification screen is displayed.
5. Use the arrows to select the parameters, then press Modify to modify the
parameters.
6. Change the parameter, then press [OK].
7.
Press [OK] to validate or to quit.
282
| Page 282 | Jan-15-2024 09:55 |
11
Configuring your Mailing System
To Next Page
Loading...
