How to set the shipping application connection
To set the shipping application connection:
1. As supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Maintenance Network advanced
settings Shipping application
The Shipping application advanced settings screen is displayed.
2. Enter PC IP address.
3. Enter PC Port number.
4. Press [OK] to validate.
To return to the home screen, you have to press to put the
machine into sleep mode. Then continue to press to turn on
the machine.
302
| Page 302 | Jan-15-2024 09:55 |
11
Configuring your Mailing System
To Next Page
Loading...
