• Belts and rollers of stacker.
To clean the accessory belts and rollers:
1. Open equipment covers.
2. Clean the belts and/or rollers with a cloth and hot water.
3. Close the covers.
How to Clean the Mail Path Sensors
The sensors are light sensitive devices successively covered by the envelopes during
their travel along the mail path.
Clean the following mail path sensors on the system base and feeder as indicated in
the following:
• Sensors of feeder.
418
| Page 418 | Jan-15-2024 09:55 |
13
Maintaining
To Next Page
Loading...
