How to Set LAN Parameters - Wireless Connection with
IPv6
IPv6 must be set up and configured by Supervisor.
You have to connect as Supervisor (see Log in as Supervisor on page 277).
To set the parameters of the LAN - Wireless:
1. Select Wireless connection type (see How to Set the Postal/Online Services
Connection on page 338).
2. As Supervisor:
From the main menu, select the path: Communication Settings LAN
configuration
The LAN configuration menu is displayed.
3. Select: DHCP OFF.
Press [OK] to validate.
340
| Page 340 | Jan-15-2024 09:55 |
11
Configuring your Mailing System
To Next Page
Loading...
