Always use the on/off switch to switch off the system. Never
unplug the power cord without switching off the system first.
1. Press either side of the switch to turn the mailing system on or off.
- The dash (or I) indicates the on side.
- The circle (or O) indicates the off side.
After switching the system off, there may be a delay of up to 20
seconds to park the print head and free the remaining voltage.
How to Turn the Mailing System to Sleep/Soft Off Mode
1.
Press (at the top right corner of the control panel).
- A short press on the Sleep/On/Soft off mode button sets the machine to
'Sleep' mode.
- A long press on the Sleep/On/Soft off mode button sets the machine to 'Soft
off'.
The light located next to the key indicates:
- Green: The Mailing System is in Awake mode and ready for use.
- Amber (continuous): The Mailing System is in Sleep mode (Low-power
mode).
- Amber (blinking): The Mailing System is in Soft off mode (Very-low-power
mode).
To avoid weighing errors, make sure the weighing device
platform is clear when starting the machine.
When the mailing system is in sleep or soft off mode, it is able
to automatically wake up to perform automatic calling if the
scheduled date and time are reached.
However, it cannot do this if the system is fully off. It requires
regular connection to the postal server so sleep or soft off mode
are recommended when possible.
3
Meet Your Mailing System
53
| Page 53 | Jan-15-2024 09:55 |
To Next Page
Loading...
Need help?
General
