Maintaining the Sealer Water Network13.3
The automatic Feeder uses water for sealing envelopes. If the system is out of water,
the mailing process continues but the envelopes will not be sealed properly.
How to Fill the Sealer Tank
To add water:
1. Remove the bottle from its base and turn it over.
2. Unscrew the cap and fill the tank with water up to the limit marks.
3. Replace the cap and put the bottle back in place.
411
| Page 411 | | Jan-15-2024 09:55 |
13
Maintaining
To Next Page
Loading...
