6. Press [OK] to validate the assignments, then press [Finish].
To see the Account list of the selected Group, press View group
content.
How to Unassign Accounts to an Operator
To delete Accounts an Operator is allowed to use:
1. Follow the procedure How to Assign Accounts to an Operator on page 192, steps
1 and 2.
2. Select the Account or Group and press Enable/Disable. Alternatively, to unassign
all the Accounts or Groups previously assigned to the selected Operator, select
All this group and press Enable/Disable.
3.
Press to return to the Edit/Modify screen.
4. Press [OK] to validate the unassignments.
To see the Account list of the selected Group, press View group
content.
How to Activate/De-activate an Operator
The ability to select the status of an operator allows you to create as many operators
as you need in advance. Users cannot use de-activated operator PIN codes for new
operators.
To activate or de-activate an Operator:
1. Perform the procedure How to Modify an Operator on page 191, steps 1 and 2.
2. In the operator parameters, select the Status line to activate or de-activate the
operator (the button displays the current status), and then press Validate.
3. On the Operator modification summary screen, press Finish.
4. A feedback of the status is displayed in the operator list.
6
Accounts and Access Control
193
| Page 193 | Jan-15-2024 09:55 |
To Next Page
Loading...
