Touchscreen Calibration13.5
Depending on the pointing device you use on the touchscreen (finger, stylus or other
non-sharp accessory), the touchscreen may need to be calibrated for better precision.
How to Calibrate the Touchscreen
To calibrate the touchscreen:
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Machine Settings Touch Screen
Calibration
2. Follow the on-screen instructions using your preferred pointing device.
The touchscreen is calibrated at the end of the process.
To return to the home screen, you have to press to put the
machine into sleep mode. Then continue to press to turn on
the machine.
421
| Page 421 | | Jan-15-2024 09:55 |
13
Maintaining
To Next Page
Loading...
