Collected Mode PIN Code7.3
How to Set/Cancel Collected Mode PIN Code
You can create a PIN code to control access who are authorised to choose S.M.A.R.T.
account.
To set a Collected Mode PIN Code:
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Machine settings Collected Mode PIN
Code
2. Press the arrow to the ON or OFF to enable or disable the PIN code.
3. Enter the PIN code if enabled.
4. Press [OK] to validate.
215
| Page 215 | | Jan-15-2024 09:55 |
7
S.M.A.R.T. Data Collector
To Next Page
Loading...
