quadient iX-9 Series

How to Set Proxy Parameters
To set the parameters of the Proxy:
1. As Supervisor (see Log in as Supervisor on page 277):
The Proxy Settings menu is displayed.
Press and select the path: Communication settings LAN settings
The LAN configuration is displayed.
2. Proxy is OFF by default. If select Proxy is ON and press [OK].
The next Proxy settings screen will display:
- Proxy URL: Empty by default. Value chosen by Supervisor.
- Proxy Port: 8080 by default. Value chosen by Supervisor.
- Proxy Domain Name: Empty by default. Value chosen by Supervisor.
- Proxy Username: Empty by default. Value chosen by Supervisor.
- Proxy Password: Empty by default. Value chosen by Supervisor.
11
Configuring your Mailing System
353
| Page 353 | Jan-15-2024 09:55 |