2. Select the report.
The Report parameters and output screen is displayed.
The information displayed in this screen depending on the type of report you have
selected.
3. Select or type required parameters and press [OK].
You can use on the keypad to clear data in a field and
then type new data.
The Output selection screen is displayed.
4. Select an available output device.
The system sends the report to the selected output.
To generate a Report (as Supervisor):
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Reports
230
| Page 230 | Jan-15-2024 09:55 |
9
Reports
To Next Page
Loading...
Need help?
General
