R&S FPC Series - Limit Line Configuration

Vector Network Analyzer
R&S
®
FPC
186User Manual 1178.4130.02 ─ 07
3. Select the "Reference Impedance" menu item to define the reference impedance of
your choice.
The value range is from 1 mΩ to 10 kΩ.
18.8 Limit Line Configuration
Access: "Lines"
Remote commands to work with limit lines:
●
Chapter 19.16.8, "Limit Lines", on page 340
Limit line settings in the VNA application described elsewhere:
●
"Display Line": Chapter 14.11, "Display Lines", on page 129Chapter 14.9.1,
"Marker Positioning", on page 120
●
"Show Limit Line": "Selecting a limit line" on page 131
●
"Upper Limit": Chapter 14.10.4, "Marker Demodulation", on page 128
●
"Lower Limit": Chapter 14.10.4, "Marker Demodulation", on page 128
●
"Audio Beep": "Performing limit checks" on page 132
Limit Line Configuration