R&S FPC Series - 20.6.2 Frequency Menu; Access: [Ampt] Reference Level; Center Frequency

Function Reference
R&S
®
FPC
388User Manual 1178.4130.02 ─ 07
Remote command:
[SENSe:]FILTer:LPASs on page 311
Mod. Trace
See "Selecting the result display" on page 148.
Remote command:
CALCulate<n>:FEED on page 304
Mod. Summary
See "Selecting the result display" on page 148.
Remote command:
CALCulate<n>:FEED on page 304
20.6.2 Frequency Menu
Access: [Freq]
Center Frequency....................................................................................................... 388
Center Freq Step Size.................................................................................................388
Center Frequency
See "Defining a center frequency" on page 94.
Remote command:
[SENSe:]FREQuency:CENTer on page 248
Center Freq Step Size
See "Defining a frequency step size" on page 94.
Remote command:
[SENSe:]FREQuency:CENTer:STEP on page 248
20.6.3 Amplitude Menu
Access: [Ampt]
Reference Level..........................................................................................................388
Deviation per Division................................................................................................. 389
Scale Adjust................................................................................................................ 389
Preamplifier.................................................................................................................389
Attenuator....................................................................................................................389
Impedance.................................................................................................................. 389
Reference Level
See "Defining a reference level" on page 99.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RLEVel on page 253
Function Reference: Analog Demodulation