R&S FPC Series - System:error:count; System:error[:Next]; System:help:headers; System:help:syntax

Remote Control
R&S
®
FPC
212User Manual 1178.4130.02 ─ 07
SYSTem:ERRor:COUNt?
This command queries the number of errors currently in the error queue.
Return values:
<NumErrors> <numeric value>
Example: //Query the number of errors in the error queue
SYST:ERR:COUN?
Usage: Query only
SYSTem:ERRor[:NEXT]?
This command queries the oldest entry in the error queue and deletes it.
If the error queue is empty, the command returns 0, 'No error'.
Return values:
<ErrorNumber> Number that contains information about the error. Negative num-
ber: error as defined in the SCPI standard. Positive number:
error that is specific to the R&S FPC.
<ErrorDescription> String containing a short error description.
Example: //Query error queue
STAT:ERR?
Usage: Query only
SYSTem:HELP:HEADers?
This command returns a list of all available remote control commands.
Return values:
<Commands> String containing all available remote control commands.
Example: //Return the syntax of all available commands
SYST:HELP:HEAD?
Usage: Query only
SYSTem:HELP:SYNTax?
This command returns the full syntax of the specified command.
Return values:
<Command> String containing the command you want to query.
Example: //Return the full syntax. In this case: 'SYSTem:ERRor[:NEXT]'.
SYST:HELP:SYNT? 'SYST:ERR?'
Usage: Query only
System Configuration